寧波環甬潤保涂層科技有限公司是一家以科技見長的公司,團隊博士占比27%。發表數十篇論文,以下僅列創始人曹均博士24篇論文。
[1] Jun Cao *, Haibo Huang, Shuxin Li, Xiaocheng Wu, Zhongwei Yin, Zeshan Abbas, Tribological and Mechanical Behaviors of Engine Bearing with CuSn10 Layer and h-BN/ Graphite Coating Prepared by Spraying under Different Temperatures, Tribology International, 2020, 106445. (1區TOP)
[2] Qingyuan Gao, Shuxin Li, Yunshuai Su, Jun Cao, Oleksandr Moliar, Grain coarsening of nano laminated structure in martensite steel under sliding wear, Tribology International, 2020, 151:106381.(1區TOP)
[3] Xiuli Zhang, Zhongwei Yin, Qin Dong, Jun Cao, Experimental comparison of the seizure loads of gray iron journal bearing and aluminum alloy journal bearing under aligned and misaligned conditions, 2020, Mechanics and Industry 21(4):408 DOI: 10.1051/meca/2020038.
[4] Jun Cao *, Liang Qin, Aibing Yu, Haibo Huang, Guoping Li, Zhongwei Yin, Huiyu Zhou, A Review of surface treatments for sliding bearings used at different temperature, Friction, Lubrication and Wear, Chapter, 2019.
[5] Wehuang Liu, Jun Cao, He Tao, Gengyuan Gao, Hulin Li, Zhongwei Yin, Optimum cutting depth and spacing of roadheader picks: A numerical simulation using a 3D cracking method, Transactions- Canadian Society for Mechanical Engineering, 2019, 43(3):366-375.
[6] Xinbo Wang, Yafei Zhang, Zhongwei Yin, Yanjie Su, Yanping Zhang, Jun Cao,. Experimental research on tribological properties of liquid phase exfoliated graphene as an additive in SAE 10W-30 lubricating oil, Tribology International, 2019, 135: 29-37. (1區TOP)
[7] Xinbo Wang, Zhongwei Yin, Hulin Li, Gengyuan Gao, Jun Cao, Experimental comparison of CuAl10Fe3 journal bearings sliding against two different coatings, Industrial Lubrication and Tribology, 2019,71(7): 956-964.
[8] Jun Cao*, Zhongwei Yin, Hulin Li, Gengyuan Gao, Xiuli Zhang, Tribological and Mechanical Properties of Ti2AlC Coating at Room Temperature and 800 ℃,Ceramics International, 2018, 44 (1)1046-1051. (1區TOP)
[9] Jun Cao, Zhongwei Yin Designs of low frictional coefficients for joint bearings by inlaying graphites and liquid spraying of MoS2,Industrial Lubrication and Tribology, 2018, 70(9):1630-1635.
[10] Jun Cao, Zhongwei Yin, Hulin Li, Gengyuan Gao, Tribological studies of soft and hard alternated composite coatings with different layer thicknesses, Tribology International, 2017, 110: 326-332. (1區TOP)
[11] Jun Cao, Zhongwei Yin, Cuiyu Qing, Hulin Li, Gengyuan Gao, Xinbo Wang, Design and analysis of a self-lubricating nuclear joint bearing above 320°C,Industrial Lubrication and Tribology, 2017, 69(2): 95-104.
[12] Jun Cao, Zhongwei Yin*, Hulin Li, Gengyuan Gao, Research progresses and suggestions of manufacturing technologies of engine bearing bushes, IOP Conference Series: Materials Science and Engineering, 2017, 272(1): 012005.
[13] Jun Cao *, Zhijin Gao, Dongcheng Wei, Design of an intelligent tracking system for solar cells, Proceedings of Institution of Civil Engineers-Energy, 2014,(167):67-73.
[14] 王平,葉曉葦,曹均. 高溫核用自潤滑關節軸承設計及分析[J],軸承,2017:,10:19-22.
[15] 高剛毅, 曹均. 汽車活塞用WS2/Sb2O3涂料涂層摩擦性能及仿真[J], 涂料工業. 2017,47(05):34-37.
[16] 高剛毅, 曹均.二級行星輪系第二級太陽輪ADAMS幾種仿真研究[J], 煤炭技術. 2016,35(04): 306-308.
[17] 葉錦宗, 李錦棒, 周寧寧, 曹均, 卿濤, 蔣世宇, 于愛兵, 成型工藝對多孔PI材料摩擦學及力學性能的影響[J], 材料工程. 2020,48(09): 144-151.
[18] 吳燁卿, 謝懿, 高海生, 祝生祥,文靜波, 曹均, 洪松, 內燃機軸瓦涂層的研究現狀[J], 機械制造. 2020,58(08): 1-5.
[19] 吳兆波, 鄧琰, 黃焜安, 齊斌, 勞靜文, 余豐, 曹均. 重力發電應用技術研究綜述[J], 通信電源技術. 2020,37(06): 55-59.
[20] 曹均, 祝生祥, 王建榮, 高海生, 祝偉青. 內燃機軸瓦噴涂工藝及檢測方法研究[J], 機械工程與自動化. 2019,(03): 148-153.
[21] 曹均, 王義亮, 楊兆建. 二級行星輪系第二級太陽輪聯合仿真研究[J], 中國農機化學報. 2015,36(04): 48-51.
[22] 曹均, 王義亮. 橫軸式掘進機截齒排列設計[J], 煤礦機械. 2013,34(04): 39-40.
[23] 曹均, 王義亮. 一種可轉變為救生梯的普通陽臺護欄[J], 機械工程與自動化. 2012,(06): 102-103.
[24] 曹均, 王義亮.基于ANSYS的采煤機行星齒輪組參數化建模與分析[J],制造業自動, 2013,10:89-90.